|
The single port Power Over Ethernet (PoE) DC Power Injector eliminates the need for a PoE enabled equipment, such as IP Camera, IP Telephones, Wireless LAN and Bluetooth Access Points, etc.. The injector is typically installed near the Ethernet hub and connected to a remote PoE device through a single Ethernet Cat 5 cable up to 100meters / 330feets . The injector can support an advanced 802.3af or nonstandard (optional) compliant device which supporting the standard PoE pin out
(Pins 4&5 Power + / Pins 7&8 Power -)
Technical Specifications:
LAN Data Rates:
--10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
Input Power Requirements:
--Input voltage ..................... 100 VAC to 240 VAC
--Input frequency...........................47 Hz to 63 Hz
Power over Ethernet Output:
--Pin Assignment and Polarity...4/5 (V+),7/8 (V-)
--Output Power.................please refer to ordering information
--
Efficiency.........................................75% min
--Short circuit protection................ auto recovery
--Over current protection................ auto recovery
Front Panel Indicators
--Power Indicator…….DC Power Outout (Green)
--PoE Indicator…………..….PD Statues (Green)*
Environmental Conditions:
--Operating temperature ............... …0℃ to 50℃
--Cooling ................................ free air convection
--Storage temperature ............... -20℃ to +85℃
--Operating Humidity...90% max non-condensing
Mechanical Specifications:
--Case Material…………….………………..Iron
--Case Color……………………………….Black
--Net Weight………………….250g approx. / unit
--Dimensions………70(W) x 35(H) x 100 (L) (mm)
Connectors:
--AC Inlet……………………………………IEC-J-4
--LAN……………………………….Shielded RJ-45
*PoE LED Indicator description, only valid for advanced 802.3af application:
|
LED Pattern
|
Port Status
|
|
OFF
|
Port open or Non-Powered Device
|
|
ON
|
Port On
|
|
FLASH
|
Unmatched PD
|
RJ-45 Connectors and Pinout:
|
RJ-45
|
TYPE
|
Pin 1
|
Pin 2
|
Pin 3
|
Pin 4
|
Pin 5
|
Pin 6
|
Pin 7
|
Pin 8
|
|
IN
|
DATA
|
RX+
|
RX-
|
TX+
|
NC
|
NC
|
TX-
|
NC
|
NC
|
|
OUT
|
DATA+PWR
|
RX+
|
RX-
|
TX+
|
VDC+
|
VDC+
|
TX-
|
VDC-
|
VDC-
|
Ordering Information:
|
Part Number
|
Supported Standard
|
Output Voltage
|
Output Current
|
Output Power
|
Remark
|
|
FR100S
|
IEEE 802.3af
|
48V
|
0.35A max
|
15.4W max
|
default
|
|
FR100
|
IEEE 802.3af
|
48V
|
0.54A max
|
25W max
|
default
|
|
FR100B
|
Non-standard
|
48V
|
0.60A max
|
30W max
|
optional
|
|
FR100C
|
Non-standard
|
24V
|
1.20A max
|
30W max
|
optional
|
|
