|
MAIN APPLICATIONS
- Connection between fiber to fiber 10Gbps Ethernet equipment function as fiber mode converter ,or as fiber repeater for long distance transmission.
- Media converter for network backbone(SAN, LAN, MAN).
- Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
- 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
KEY Feature：
- 3R Repeater
- Support Jumbo Frame
- Transparent Transport and very low delay
- Support ITUT prescribed DWDM/CWDM wavelength
- Support DMI function for SFP+/XFP fiber module
- Support PRBS31 Pattern Generator and Checker function
- Support Loopback test function
- Economic In-band Management function
- Powerful Network Management function（Web，SNMP，Console）
- Support hot plugging
- Support 2U Rack (16 channel) and standalone use
- Full State Led display
- Easy installation
Technical Information:
|
Performance Data
|
Technical Indexes
|
|
Equipment function
|
3R Repeater
|
|
Transmission Speed
|
10Gb/s （ 9.95Gb/s-11.35Gb/s ）
|
|
Protocols
|
IEEE802.3ae (10Gbase-R/LRM)
|
|
Access Type
|
10G LAN/ 10G WAN
|
|
Interface Type
|
A Type: SFP+ To/From SFP+
B Type: SFP+ To/From XFP
C Type: XFP To/From XFP
|
|
Transmission Distance
|
SFP+ module: Up to 40Km
XFP module: Up to 80Km
|
|
Maximum Packet
Forwarding Rate
|
14,880,950/S
|
|
Network management
information:
|
• Card type information
• SFP+ or XFP fiber module detection
• SFP+ or XFP fiber module DMI function （ Temperature 、 Voltage 、 Optical power ）
• Link status detector
• Enable/Disabled Loopback test function
• Enable/Disable PRBS Generator and checker function
• Rate select （ 10Gbase-Lan or Wan ）
• Remote card's status monitor （ only in pairs ）
|
|
power requirement
|
Rack-mountable : AC 85 ～ 220V OR DC -48V
Standalone: AC 220V OR -48V
Power consumption: ≤4W
|
|
Work Environment
|
Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% （ non-condensing ）
|
|
Dimension
|
Card ： 11.5mm （ W ） × 78mm （ D ）
Standalone ： 156mm （ W ） × 128mm （ D ） × 32mm （ H ）
|
  
|
